Connectors and Adapters


Jump To: Adapters, Charge Leads, Connectors, Balance Boards


Equinox 2S/3S Adapter Set

Equinox 2S/3S Adapter Set

Stock Number: GPMM3161

Usage: Replaces worn or damaged 2S and 3S adapters for the Equinox Cell Balancer.


Back to top of page

Equinox 4S/5S Adapter Set

Equinox 4S/5S Adapter Set

Stock Number: GPMM3162

Usage: For connecting 4 and 5 cell LiPo packs wired for balancing to the Equinox Cell Balancer.


Back to top of page

2mm Male Bullet Adapter to JST Male Connector

2mm Male Bullet Adapter to JST Male Connector

Stock Number: GPMM3138

Usage: To connect a motor with a female JST Connector to an electronic speed control with 2mm female bullet connectors.

Specifications:
Maximum Recommended Continuous Current: 5 amps-limited to the JST connector
Connector #1: 2mm Male Bullet
Connector #2 JST Male (Terminal Gender: Male/Housing Gender: Female)
Wire: 20AWG
Wire Length: 1.8" (45mm)
Weight: 0.08oz (2.29g)


Back to top of page

2mm Female Bullet Adapter to JST Connector

2mm Female Bullet Adapter to JST Connector

Stock Number: GPMM3139

Usage: To connect a motor with 2mm Male Bullet Connectors to an electronic speed control with a JST Male Connector.

Specifications:
Maximum Recommended Continuous Current: 5 amps-limited to the JST connector
Connector #1: 2mm Female Bullet
Connector #2 JST Female (Terminal Gender: Female/Housing Gender: Male)
Wire: 20AWG
Wire Length: 1.8" (45mm)
Weight: 0.07oz (2g)


Back to top of page

Star Plug Parallel ESC Adapter

Star Plug Parallel ESC Adapter

Stock Number: GPMM3141

Usage: To connect two electronic speed controls with Star Plug male connectors in parallel to a battery with a Star Plug female connector.

Specifications:
Maximum Recommended Current: 60 amps
Connector #1: Star Plug
Connector #2: Star Plug
Wire: None
Weight: 0.31 oz (8.79 g)


Back to top of page

Parallel Star 2 to 1 Adapter

Parallel Star 2 to 1 Adapter

Stock Number: GPMM3142

Usage: To connect two batteries with Star Female connectors in Parallel to an ESC with a Star Male connector.

Specifications:
Maximum Recommended Current: 60 amps
Connector #1: Star Male
Connector #2: Star Female
Connector #3: Star Male
Wire: None
Weight: 0.31 oz (8.67 g)


Back to top of page

Series Star Plug Adapter 2 to 1

Series Star Plug Adapter 2 to 1

Stock Number: GPMM3143

Usage: To connect two batteries with Star Plug Female connectors in Series to an ESC with a Star Plug Male connector.

Specifications:
Maximum Recommended Current: 60 amps
Connector #1: Star Male
Connector #2: Star Female
Connector #3: Star Male
Wire: 12AWG 1.96" (50mm) long
Weight: 0.42 oz (11.87 g)


Back to top of page

Parallel Adapter 2 Micro to 1 Micro

Parallel Adapter 2 Micro to 1 Micro

Stock Number: GPMM3146

Usage: To connect two batteries with Micro connectors in Parallel to an ESC with a Micro.

Specifications:
Maximum Recommended Current: 15 amps
Connectors: Micro
Wire: 16AWG 1.96" (50mm) long
Weight: 0.19 oz (5.3 g)


Back to top of page

Series Adapter 2 Micro to 1 Micro

Series Adapter 2 Micro to 1 Micro

Stock Number: GPMM3147

Usage: To connect two batteries with Micro connectors in Series to an ESC with a Micro.

Specifications:
Maximum Recommended Current: 15 amps
Connectors: Micro
Wire: 16AWG 1.96" (50mm) long
Weight: 0.12 oz (3.5 g)


Back to top of page

Micro to JST Male Adapter

Micro to JST Male Adapter

Stock Number: GPMM3135

Usage: Connects a battery having a JST Female connector to an ESC having a Micro connector.

Specifications:
Maximum Recommended Current: 5 amps
Connector #1: Micro, male pin is positive (+)
Connector #2: JST Male (male pins, female shell)
Wire: 20AWG 1.96" (50mm) long
Weight: 0.064 oz (1.82 g)


Back to top of page

Micro to JST Female Adapter

Micro to JST Female Adapter

Stock Number: GPMM3134

Usage: Connects a battery having a Micro connector to an ESC having a JST Male connector.

Specifications:
Maximum Recommended Current: 5 amps
Connector #1: Micro, male pin is negative (-)
Connector #2: JST Female (female pins, male shell)
Wire: 20AWG 1.96" (50mm) long
Weight: 0.06 oz (1.62 g)


Back to top of page

Star Plug Male to Standard Male Adapter

Star Plug Male to Standard Male Adapter

Stock Number: GPMM3131

Usage: Connects a battery having a Star Plug connector to an ESC having a Standard Female connector.

Specifications:
Maximum Recommended Current: 20 amps
Connector #1: Star Plug
Connector #2: Standard Male (Terminal Gender: Male / Housing Gender: Female)
Wire: 14AWG 1.96" (50mm) long
Weight: 0.3 oz (8.37g)


Back to top of page

Star Female to Standard Female Adapter

Star Female to Standard Female Adapter

Stock Number: GPMM3130

Usage: Connects a battery having a Standard Male connector to an ESC having a Star Male connector.

Specifications:
Maximum Recommended Current: 20 amps
Connector #1: Star Female
Connector #2: Standard Female (female pins, male shell)
Wire: 14AWG 1.96" (50mm) long
Weight: 0.28 oz (8g)


Back to top of page

Micro to Male Adapter

Micro to Male Adapter

Stock Number: GPMM3127

Usage: Connects a battery having a Female connector to an ESC having a Micro connector.

Specifications:
Maximum Recommended Current: 15 amps
Connector #1: Micro, male pin is positive (+)
Connector #2: Male
Wire: None
Weight: 0.11 oz (3.18g)


Back to top of page

Micro to Star Female Adapter

Micro to Star Female Adapter

Stock Number: GPMM3126

Usage: Connects a battery having a Micro connector to an ESC having a Star male connector.

Specifications:
Maximum Recommended Current: 15 amps
Connector #1: Micro, male pin is negative (-)
Connector #2: Star Female
Wire: None
Weight: 0.1oz (2.9g)


Back to top of page

2-Pin to Standard Connector Adapter

2-Pin to Standard Connector Adapter

Stock Number: GPMM3108

The adapter has a standard male Tamiya connector (with clip) on one end and a red male 2-pin BEC connector on the other end.

Usage: For connecting batteries having a standard connector to a charger having a 2-pin connector.

Specifications: Length: 101 mm (4")


Back to top of page

2-Pin to Banana Plug Charge Adapter

2-Pin to Banana Plug Charge Adapter

Stock Number: GPMM3105

One end has one red and one black male banana plug and the other end has male terminals with female red plasic shell (female 2-pin BEC).

Usage: Red plastic 2-pin connector is a (female) BEC type. Male banana plugs will plug into any female banana plug receptacle. One black (-) and one white (+) wire are both 24 gauge. One year quality guarantee.

Specifications: Length: 3.5" (89 mm) (overall tip to tip)


Back to top of page

Female Universal Connector Charge Adapter

Female Universal Connector Charge Adapter

Stock Number: GPMM3104

This is used for some Futaba Transmitters batteries which have the male- terminals with a female plastic shell (female Futaba J) connector.

Usage: Red plastic 2-pin connector is a (female) BEC type. Black plastic connector is a (male) Futaba J type. One black (-) and one white (+) wire are both 24 gauge. For the male universal connector charge adapter, use GPMM3103.

Specifications: Length: 3" (75 mm) (overall tip to tip)


Back to top of page

Male Universal Connector Charge Adapter

Male Universal Connector Charge Adapter

Stock Number: GPMM3103

This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a receiver battery pack that needs charging.

Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Black plastic connector is a (female) Futaba J type that will also accept Hitec, JR and Airtronics Z receiver battery connectors. Some transmitter batteries that have this same type of connector may be removed from the transmitter and charged the same way. One black (-) and one white (+) wire are both 24 gauge. For the female universal connector charge adapter, use GPMM3104.

Specifications: Length: 3" (75 mm) (overall tip to tip)


Back to top of page

Hitec/Air Tx Charge Adapter

Hitec/Air Tx Charge Adapter

Stock Number: GPMM3101

This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a Hitec/Airtronics transmitter charging jack to charge the transmitter battery.

Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Hitec/Airtronics transmitter charging plug is round and plugs into the transmitter case. One black (-) and one white (+) wire are both 24 gauge.

Specifications: Length: 3" (75 mm) (overall tip to tip)


Back to top of page

Futaba Tx Charge Adapter

Futaba Tx Charge Adapter

Stock Number: GPMM3100

This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a Futaba transmitter charging jack to charge the transmitter battery.

Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Futaba transmitter charging plug is round and plugs into the transmitter case. One black (-) and one white (+) wire are both 24 gauge.

Specifications: Length: 3" (75 mm) (overall tip to tip)


Back to top of page

Charge Lead Banana Plugs to Micro

Charge Lead Banana Plugs to Micro

Stock Number: GPMM3149

Usage: For charging a battery with a Micro connector.

Specifications:
Maximum Recommended Current: 10 amps
Connector #1: Banana Plugs
Connector #2: Micro, male pin is negative (-)
Wire: 16AWG 5.9" (150mm) long
Weight: 0.75 oz (21.15 g)


Back to top of page

Charge Lead Banana Plugs to Star Male

Charge Lead Banana Plugs to Star Male

Stock Number: GPMM3148

Usage: For charging a battery with a Star Female connector.

Specifications:
Maximum Recommended Current: 10 amps
Connector #1: Banana Plugs
Connector #2: Star Male
Wire: 14AWG 5.9" (150mm) long
Weight: 0.93 oz (26.45 g)


Back to top of page

Charge Lead Banana Plugs/Heli-MaxTM Micro Plug

Charge Lead Banana Plugs/Heli-Max Micro Plug

Stock Number: GPMM3150

Usage: For charging a battery with a Heli-Max Micro Plug.

Specifications:
Connector #1: Banana Plugs
Connector #2: Heli-Max Micro Plug
Wire: 24AWG 5.1" (130mm) long


Back to top of page

Female 2-Pin Red Connectors

Female 2-Pin Red Connectors

Stock Number: GPMM3107

These are female 2-pin red connectors with 3" wires. For the male connectors with wire, use GPMM3106.

Usage: Designed to be used with most Park Flyer ElectriFly electronics. Wires are 24 gauge and pre-tinned at ends for easy soldering.

Specifications:
Length: 19 mm (overall)
Width: 7 mm
Height: 4 mm


Back to top of page

Male 2-Pin Red Connectors

Male 2-Pin Red Connectors

Stock Number: GPMM3106

These are Male 2-Pin Red Connectors with 3" wires. For the female connectors with wire, use GPMM3107. This connector can be used to replace BEC-type connectors.

Usage: Designed to be used with most Park Flyer ElectriFly electronics. Red 2-pin connector is a BEC-style. Wires are 24 gauge and pre-tinned at ends for easy soldering. One year quality guarantee.

Specifications:
Length: 13 mm (overall with flanges)
Width: 5.5 mm
Height: 3 mm


Back to top of page


2 mm Male and Female Gold Plated Bullet Connectors

GPMM3110 GPMM3111

Stock Numbers:
    GPMM3110 Male
    GPMM3111 Female

Specifications:
Length: 0.59" (15 mm)
Inner Diameter: 0.079" (2 mm)
Outer Diameter: 0.097" (2.5 mm)

GPMM3110

GPMM3111

Back to top of page



3.5 mm Male and Female Gold Plated Bullet Connectors

Stock Numbers:
GPMM3112 Male
GPMM3113 Female

GPMM3112 GPMM3113

Specifications:
Length: 0.47" (12 mm)
Inner Diameter: 0.14" (3.5 mm)
Outer Diameter: 0.17" (4.25 mm)

GPMM3112

GPMM3113

Back to top of page



4 mm Male and Female Gold Plated Bullet Connectors

GPMM3114 GPMM3115

Stock Numbers:
GPMM3114 Male
GPMM3115 Female

Specifications:
Length: 0.83" (21 mm)
Inner Diameter: 0.16" (4 mm)
Outer Diameter: 0.19" (5 mm)

GPMM3114

GPMM3115

Back to top of page

6 mm Male and Female Gold Plated High Current Bullet Connectors

GPMM3116 GPMM3117

Stock Numbers:
GPMM3116 Male
GPMM3117 Female

Specifications:
Length: 0.6" (14 mm)
Outer Diameter: 0.2" (6 mm)

GPMM3116

GPMM3117

Back to top of page

2mm Male Bullet to 3.5mm Female Gold Plated Bullet Adapter

GPMM3120Stock Number: GPMM3120

Specifications:
Weight: 0.03oz (0.95g)


Back to top of page

3.5mm Male Bullet to 4mm Female Gold Plated Bullet Adapter

GPMM3121Stock Number: GPMM3121

Specifications:
Weight: 0.08oz (2.33g)


Back to top of page

3.5mm Male Bullet to 2mm Female Gold Plated Bullet Adapter

GPMM3122 Stock Number: GPMM3122

Specifications:
Weight: 0.05oz (1.41g)


Back to top of page

4mm Male Bullet to 3.5mm Female Gold Plated Bullet Adapter

GPMM3123 Stock Number: GPMM3123

Specifications:
Weight: 0.08oz (2.14g)


Back to top of page

4mm Male Bullet to 6mm Female Bullet Adapter

GPMM3118 Stock Number: GPMM3118

 


Back to top of page

6mm Male Bullet to 4mm Female Bullet Adapter

GPMM3119 Stock Number: GPMM3119

 


Back to top of page

Triton EQ Balance Board ElectriFly LiPo

Triton EQ Balance Board ElectriFly LiPo

Stock Number: GPMM3200

Usage: For use with the TritonEQ and the Triton2 EQ chargers.

Specifications:
Compatible Batteries: Electrifly batteries
Voltage Range: 2S to 6S (7.4V-22.2V)


Back to top of page

Triton EQ Balance Board FlightPower/ThunderPower

Triton EQ Balance Board FlightPower/ThunderPower

Stock Number: GPMM3201

Usage: For use with the TritonEQ and the Triton2 EQ chargers.

Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries
Voltage Range: 2S to 6S (7.4V-22.2V)


Back to top of page