With AC power and balancing!

Triton EQ

Just because a charger is small and affordable doesn't mean it can't still handle many of your charging needs -- the Triton EQ is proof! Based on the Triton Jr., the Triton EQ offers the capability to handle the latest battery technologies, including LiPo, Li-Ion and even LiFe (A123) cells -- and there's no need for an external LiPo balancer, because it's built in. The Triton EQ can also charge 1-14 NiCd and NiMH cells -- great for radio batteries -- with charge currents up to 5 amps to handle large power packs. And that's in addition to the convenience of a built-in AC power supply and an adjustable-angle LCD!


  • Fast charge current is adjustable from 100mA to 5 amps
  • Peak detection technology for NiCd and NiMH batteries
  • Constant current / constant voltage technology for lithiums and lead-acid batteries
  • NiCd and NiMH trickle current
  • Discharge current adjustable from 100mA to 1 amp
  • Discharge cutoff voltage adjustable for NiCd/MH batteries
  • NiCd and NiMH batteries can be cycled from 1 to 5 times for conditioning1 year warranty
  • Touchpad controls and super-simple programming make for simplicity and reliability
  • Displays input and output volts, peak volts, individual lithium cell voltages, average discharge volts, charge and discharge capacity, currents and time, error messages, and more
  • Audible beeper aids in programming and notifies of function changes
  • Safety features include fast charge safety timer, current overload and reverse polarity protection

Triton EQ
Triton EQ 2
Triton EQ
DC input makes the Triton EQ portable, a small, very lightweight, built-in switching AC power supply makes it handy for indoor charging as well.
Balancing capability for up to 6S lithium packs is built in, so it's equally useful for the smallest indoor fliers as well as big outdoor aircraft.
  Not only is the LCD reversed with a backlight, it also features a 0-45 degree adjustable view angle for easy reading.


Stock Number
AC input voltage
110V 60Hz -- 240V 50Hz (detachable AC cord)
DC input
11-15.0V DC, with large alligator clips
Number of outputs
one, banana jacks
Battery types, # cells
1-14 NiCd, NiMH
1-6 LiPo, Li-Ion, LiFe (3.3, 3.6 or 3.7V cells)
2, 4, 6, 8, 10, 12V Pb (2V per cell)
Fast charge current
63W max DC, 50W max AC
Fast charge termination
peak detection for NiCd, NiMH
cc/cv for Pb and lithiums
Fast charge safety timer
NiCd/NiMH 1.5 hours; lithiums 3 hours or turn off
Discharge current
Discharge cutoff voltage
0.1-16.8V NiCd/NiMH
3.0V per cell LiPo/Li-Ion
2.5V per cell LiFe
1.8V per cell Pb
Battery memories
Programming controls
membrane touchpad, 4 buttons
Display type
2x16 reverse LCD w/backlight and adjustable angle
Audible indicators
Case material
aluminum, ABS plastic
Safety devices
solid-state reverse polarity and overload
Case size
5.9 x 6.0 x 2.3 in (150 x 153 x 58 mm)
23.8 oz (675 g, w/o power cord)


Trickle current
charge current/20
Peak sensitivity
8mV NiCd/5mV NiMH
Peak delay at start
3 minutes


Balancing accuracy
5mV per cell
Balancing connector
FlightPower and ElectriFly adapters included
Maximum node current