Almost-Ready-to-Fly Electric Foam Aerobat
Extra light and easy, for unlimited 3D power!
The Extra 330SC performs 3D the same way it assembles: with virtually effortless ease and impressive results! Simplicity and factory-installed extras push assembly time to the minimum, while an all-up weight of just over 6 ounces pushes performance to the limit!
[ Check out the review by
All control surfaces are prehinged. The carbon-fiber wing spars are factory-installed, adding strength without extra weight or work. Simplified, laser-cut hardware and clever alignment jigs add even more time savings, cutting bench time to the bone!
At just over six ounces, the Extra 330SC performs brilliantly on a RimFire™ 250 — the smallest outrunner motor ElectriFly makes!
Large control surfaces and maximum throws put the wildest 3D aerobatics within easy reach.
All control surfaces are prehinged with 3M® Blenderm® for toughness, time-savings and assembly ease.
Team Futaba member Jason Danhakl with the Extra 330SC prototype and the pilot's award for "Best Sport Performance" he won at the 2009 JR Indoor Festival.
A striking yellow and black trim scheme makes the Extra 330SC easy to track in the air and easy to admire anywhere.
Stock Number GPMA1129
Wingspan 32.5 in (825 mm)
Wing Area 267 in² (17.2 dm²)
Weight 6.2-6.8 oz (175-195 g)
Wing Loading 3.3-3.7 oz/ft² (10-11 g/dm²)
Length 35 in (890 mm)
Requires 4-channel radio w/3 micro servos, outrunner brushless motor, 8A brushless ESC (min) & 7.4V, 300mAh LiPo battery.
Futaba 4YF 4-Channel FHSS System
Futaba S3114 High-Torque Micro Servo
RimFire™ 250 Outrunner Brushless Motor
Silver Series 8A Brushless Electronic Speed Control
FlightPower™ FP25 7.4V 350mAh LiPo Battery w/Star Plug
Futaba R6004FF 4-Channel FASST Micro Indoor Receiver
Futaba R616FFM 6-Channel FASST Micro Receiver
For a complete list of required items, see the instruction manual. Ask your hobby dealer for additional recommendations.
3M® and Blenderm® are registered trademarks of the Minnesota Mining and Manufacturing Company.