The Stinger II is factory-covered in a multi-colored MonoKote trim scheme that's easy to see during high-energy maneuvers.
Classic design, modern features.
- Two-piece wing with joiner tube simplifies assembly.
- Thick, airfoiled wing and large control surfaces for a wide flight envelope.
- Built-up balsa airframe, factory-covered top-to-bottom.
- Finishing touches include a painted fiberglass cowl and wheel pants.
- Includes pilot figure.
Ailerons and elevators are prehinged for reduced building time.
A two-piece wing with joiner tube speeds assembly and simplifies transport.
A large hatch makes it easy for pilots to access their radio gear. It arrives prefinished, with an installed pilot figure.
Servos on each wing panel maximize mixing options, while simplifying set-up.
A painted fiberglass cowl and wheel pants add attractive finishing touches to this classic sport plane.
Stock Number: GPMA1010
Wingspan: 49.5 in (1,255 mm)
Wing Area: 586 in² (37.8 dm²)
Weight: 5-5.5 lb (2.27-2.49 kg)
Wing Loading: 20-22 oz/ft² (61-67 g/dm²)
Length: 46 in (1,170 mm)
Requires: Radio system with a minimum of 4 channels; 5 servos; 2-stroke .46-.55 or 4-stroke .70-.72 engine.
Product Manual -
Parts Listing -
Accessories Needed -
Please note: all recommendations were the best choices available at the time of product release.
Please consult your dealer or the instruction manual for additional choices.
FUTK6000 Futaba® 6J 2.4GHz S-FHSS Radio System
OSMG0547 O.S.® 46AX ABL Or
OSMG0556 O.S. 55AX ABL OR
OSMG0877 O.S. 72FS-a Ringed
FUTM0004 (4) Futaba S3004 Standard Servos
BISG4046 Bisson Pitts Muffler - O.S. 40SF/46AX/50SX/55AX