The tried and true Stik — now as an easy electric!

Expertly Covered in Top Flite MonoKote

For many years the Stik design has been a staple at the flying field, and now ElectriFly has equipped it with clean, quiet electric power! Glow pilots considering an electric aircraft will find familiarity in the ElectroStik’s quality wood construction and traditional look. Modelers who enjoy the advantages of brushless motors have the opportunity to experience flying an R/C classic. And everyone will appreciate how easy it is to get to the flight line — especially with the Receiver-Ready (Rx-R™) version!

  • It’s an entirely new take on the classic "Stik" design that has been a favorite among R/C pilots for years!
  • All flight surfaces are prehinged with control horns mounted to shorten assembly time and ensure perfect alignment.
  • Flight-ready after just one hour of simple assembly — with no gluing!
  • Rx-R version comes with a quality ElectriFly brushless power system and three ES80 micro servos — just add a receiver and battery.
  • Available as a Rx-R or an ARF!
ElectroStik ARF

ElectroStik Rx-R

The Rx-R Difference!
An Rx-R is more than an ARF – it's a new level of pilot ease! The on-board gear below is included and installed. Add a receiver and battery – and you're ready to fly!
ElectriFly RimFire 42-40-1000 Outrunner Brushless Motor
ElectriFly RimFire .25 (42-40-1000) Outrunner Brushless Motor
An extremely high power-to-weight ratio makes this the ideal choice for the ElectroStik. Tightly wrapped windings push efficiency up to 77%. GPMG4675
ElectriFly SS45 Brushless ESC
ElectriFly SS45 Brushless ESC
Hooks up in seconds, and delivers superbly smooth, precise response throughout the throttle range. Comes with Dean's® connectors. GPMM1840
Tactic TSX10 Digital High-Torque MG Micro Servo
Delivers exceptional torque and speed, and weighs only 0.6 ounces. TACM0210

[ Click here for the Rx-R review by RC Universe ]

main wing carbon-fiber tube
The main wing slides onto this lightweight carbon-fiber tube and bolts together with just four screws and two straps – no messy epoxy!
horizontal and vertical stabilizers
The horizontal and vertical stabilizers simply bolt together, without measuring or gluing.
ES80 micro servos
The included servos are quality ElectriFly ES80 micro servos, already installed so that all you have to do is plug in your receiver.*
*Receiver shown is not included.
RimFire 42-40-1000 outrunner brushless motor
The recommended RimFire .25 (42-40-1000) outrunner brushless motor delivers plentiful, dependable power.
roomy interior
Access to the roomy interior is quick and easy, allowing for convenient battery changes.
thumb screws
The wing attaches quickly with these two EZ Bolt thumb screws – no tools required!
52.75" wingspan
With its 52.75" wingspan, the ElectroStik is ideally sized for both excellent performance and transportation ease.
parts layout
With its low number of parts and high amount of prefabrication, your ElectroStik requires only an hour of final assembly.


Stock Numbers
GPMA1574/ARF; GPMA7500/Rx-R
52.75 in (1340 mm)
Wing Area
589 in² (38 dm²)
3-3.5 lb (1360-1587 g)
Wing Loading
11.7-13.6 oz/ft² (36-42 g/dm²)
45.5 in (1155 mm)
Both require
4-channel radio, receiver, 11.1V 3200mAh LiPo battery, charger
ARF also requires
3 micro servos, outrunner brushless motor, 45A brushless ESC

Recommended Products


Futaba 6J 2.4GHz S-FHSS Radio System
Onyx LiPo 3S 11.1V 1800mAh 30C Star Plug (2)
Tactic TR624 6-channel SLT Receiver


Futaba 6J 2.4GHz S-FHSS Radio System
ElectriFly 45A Brushless Electronic Speed Control
ElectriFLy LiPo Battery 3S 11.1V 3200mAh 25C
Tactic TR624 6-channel SLT Receiver
Tactic TSX10 Digital High-Torque MG Micro Servo

Please note: All recommendations are the best choices available at the time of product release. For additional choices, please check with your dealer.

MPEG View the video clip:
23.5MB, 13.3MB, 7.3MB