 
    
   |
 |
Step up in simplicity, style and size!
Can you imagine a giant-scale project that assembles as quickly and easily as a .40- or .60-size ARF? The folks at Great Planes did — and that’s why the Revolver 50 cc is, hands-down, the best gas giant model around.
If there’s an easy, effortless way to do it, Great Planes has included it in Revolver 50 cc design. Prehinged control surfaces, simpler ways to attach and remove the wings and horizontal stabs, painted fiberglass parts — the Revolver 50 cc has them all, along with big-plane presence, impressive performance and agile aerobatic handling.
- Great first gas airplane
- Simple 4-channel setup
- Offers “bigger-is-better” performance and easier-than-average assembly
Wing panels with prehinged ailerons slide onto a carbon-fiber joiner tube and “lock” in place with a few turns of a nylon thumbscrew.
|
 |
Like the wing panels, the prehinged stabilizer halves slide onto a joiner tube. Each half attaches with just two screws — a feature that streamlines setup and removal and simplifies storage. |
The hatch arrives with a painted pilot figure and clear canopy already installed, providing time savings as well as easy access to radio gear and the fuel tank. |
|
A factory-installed ring offers an “invisible” way to secure the painted fiberglass cowl. An aluminum spinner is included, as part of a complete, high-quality hardware package. |
Revolver pluses also include sturdy aluminum gear and fiberglass wheel pants that mount with just two screws. |
|
The Revolver 50 cc offers the same handling as the .40 and .60 versions: agile, predictable and ideal for aerobatics. Its weight and seven and a half foot wingspan make easier to handle in the wind and easier to track in the air. |
Built for strength, lightness and good looks!
The Revolver 50 cc features a built-up fuselage and tail surfaces,
balsa-sheeted foam-core wings and factory-applied MonoKote film. |
|
|
 |
GPMA1425
Wingspan: 90 in (2285 mm)
Length: 82.5 in (2095 mm)
Wing Area: 1303 in² (84dm²)
Weight: 19.5-20.5 lb (8.84-9.30 kg)
Wing Loading: 34-36 oz/ft² (104-110 g/dm²)
Requires: Radio with a minimum of 4 channels, 5 high-torque and 1-2 standard servos & 50-55 cc gasoline engine |
Recommended Products
| FUTK6000 |
Futaba 6J 6-Channel 2.4GHz S-FHSS Computer Radio System |
| FUTM0045 |
(5) Futaba S3305 High-Torque Standard Servo |
| FUTM0075 |
Futaba S9001 Aircraft Servo |
| DLEG0055 |
DLE-55 Gasoline Engine w/Electronic Ignition |
Recommended Options
| JTCG2105 |
J’Tec Radiowave Wraparound Pitts Muffler DLE50/55 |
| FUTM0075 |
Futaba S9001 Aircraft Servo (additional, for optional choke) |
| OSMG1555 |
O.S GT55 Gasoline Engine |
Note: For the most complete list of required items, see the instruction manual. Ask your hobby dealer for additional recommendations.
 Product Manual -
Parts Listing -
Accessories Needed -
Product Flier
|
|
|
|
 |
|
