Great Planes
World Class Radio Controlled Models and Accessories
Great Planes
GalleryProduct ReviewsWhere to Buy
HomeR/C AirplanesAccessoriesAdhesivesToolsField EquipmentBuilding EquipmentElectriFly Accessories
ElectriFly
Real Flight R/C Flight Simulator
Technical DataGlossary of TermsAirplane Skill Level GuideAircraft Comment Form
About Great PlanesDownload Brochures
Tech Notice

Revolver

Revolver
Revolver

The Revolver's contemporary styling makes it a real standout on the flight line. Once it's airborne, it really takes center stage — and that's regardless of whether it's equipped with a glow engine or brushless motor! Get ready to fire off one crowd-pleasing maneuver after another with the Revolver — it's the "sports car" of sport aerobats!

Expertly covered with Top Flite MonoKote
  • Select balsa and ply are used for the fuselage and tail section; the 2-piece, plug-in wing features a wire cut foam core that is balsa-sheeted.

  • Airfoil-shaped tail surfaces allow the plane to lock in and track solidly.

  • Comes with a complete package of quality Great Planes hardware.
[ Check out reviews by RC Universe The E Zone ]





parts layout
Only about 10 hours of final assembly are required before your Revolver is flight-ready.

cowl and wheel pants
The fiberglass cowl, wheel pants, and landing gear are painted in high gloss colors to match the trim scheme.
canopy
Not only does the clear canopy come installed, it also has a great-looking frame painted on it. You also get a realistic-looking pilot figure.

 

 
aileron
Short and direct aileron linkages deliver strong, accurate control during high- and low-speed flight.
engine
rimfire
The bolt pattern on the firewall lines up exactly for either a .46-.70 glow engine mount or a motor mount for installing a brushless outrunner motor.
 
hatch
battery
On-board radio gear is quickly accessed through this hatch. It also makes it easy to change LiPo battery packs when equipped with an ElectriFly™ brushless power system.
GALLERY
gallery pic 1
gallery pic 2
gallery pic 3
gallery pic 4
gallery pic 5 gallery 7 pic
gallery pic 9  

MPEG View the video clip:
20.4MB, 3.0MB, 5.5MB
 

SPECIFICATIONS
Stock Number: GPMA1018
Wingspan: 59 in (1500 mm)
Wing Area: 563 in² (36 dm²)
RTF Weight: 6-7 lb (2720-3180 g)
Wing Loading: 25-29 oz/ft² (76-88 g/dm²)
Length: 48 in (1220 mm)
Requires: 4+ channel radio w/servos (50 oz-in min. torque)
Electric Motor Requirements: 800kV brushless outrunner motor (GPMG4725), 80A brushless ESC, (2) 3200mAh 11.1V 20C LiPo packs, 11 x 5.5E prop, large aluminum motor mount
Glow Engine Requirements: 2-stroke .46-.55 cu in or 4-stroke .70 cu in engine
PDFProduct Manual - Parts Listing - Accessories Needed - Product Flier


© 2007-2014 Hobbico, Inc. All rights reserved. Terms of Use
 
Suggest Our Next New Airplane