Model Parts & Accessories

Wheels & Landing Gear

Engineered to stand up to "less-than-smooth" landings and boost any pilot's confidence.

UltraLite™ Foam Wheels
Foam wheel lineart

Mounted on impact-resistant hubs

Exceptionally lightweight foam design

These precision-trued tires add as little weight as possible to your model and help absorb impact for smooth, worry-free landings. The edges are specially rounded to keep your model tracking straight down the runway.

GPMQ42001-3/4" (45 mm) 1 pair
GPMQ42012" (51 mm) 1 pair
GPMQ42022-1/4" (57 mm) 1 pair
GPMQ42032-1/2" (64 mm) 1 pair
GPMQ42042-3/4" (70 mm) 1 pair
GPMQ42053" (76 mm) 1 pair
Tailwheel lineart

Rubber tires on a strong, lightweight hub

GPMQ42403/4" (19 mm) 1 pc.
GPMQ42411" (25 mm) 1 pc.
GPMQ42421-1/4" (32 mm) 1 pc.
GPMQ42431-1/2" (38 mm) 1 pc.
Nylon Landing Gear Straps
Gear strap lineart

Available for recessed or exposed gear wire

GPMQ4250Flat Strap w/Screws 4 pcs.
GPMQ4252For 1/8" Wire w/Screws 4 pcs.
GPMQ4254For 5/32" Wire w/Screws 4 pcs.
Dural Landing Gear
Landing gear lineart

Made of durable aluminum, predrilled for 8-32 axles

Stronger than wire gear

GPMQ1800L12 .09
GPMQ1810L1 .19
GPMQ1820L2 .40
GPMQ1830L3 .60
GPMQ1840L4 Large .60
GPMQ1850L8 Large .90-1.5
Tailwheel Brackets
Tailwheel bracket lineart
GPMQ4265Uses 3/32" Wire 1 pc.
Plated Brass Wheel Collars
Wheel collar lineart

Resists corrosion

Each set includes hex L-wrench

GPMQ43001/16" 4 pcs.
GPMQ43011/16" 12 pcs.
GPMQ43023/32" 4 pcs.
GPMQ43033/32 12 pcs.
GPMQ43041/8" 4 pcs.
GPMQ43051/8" 12 pcs.
GPMQ43065/32" 4 pcs.
GPMQ43075/32" 12 pcs.
GPMQ43083/16" 4 pcs.
GPMQ43093/16" 12 pcs.
Tailwheel Assembly
Tailwheel lineart

Requires tailwheel and retainer

Comes pre-bent, with nylon bearing/mounting tab in place

GPMQ1900Tailwheel Assembly
Scale Tailwheel Assembly
Scale .60 Tailgear Assembly

Set includes a durable, scale-looking aluminum tailwheel bracket, 1-3/8 lightweight foam tire and all basic linkages and hardware.

Hardware is supplied for a scale-looking, spring centered pull/pull assembly that provides better dampening when landing on grass or rough runway surfaces.

Equipping the assembly with a steel pushrod (not included) allows modelers to utilize a direct-connect tailgear on their plane for crisp ground control.

GPMQ4245Scale Tailwheel Assembly
Steerable Nose Gears
Nose gear lineart

Available in complete sets or individual parts

Unique bearing block can be used in one piece or may be separated for custom installation

GPMQ4260 Steerable Bent Set includes Bearing Blocks, Mounting Hardware & Steering Arm 1 set

GPMQ4261 Steerable Straight Set Includes Bearing Blocks, Mounting Hardware & Steering Arm 1 set

GPMQ4262Steerable Straight Wire 1 pc.
GPMQ4263Nylon Nose Gear Blocks for 5/32" Wire 1 set
GPMQ4264Nylon Steering Arm with 5/32" Collar 1 pc.
Adjustable Axles
Axle lineart

Allows adjustment of axle height on landing gear struts

For strut style landing gear

GPMQ42791-1/4" x 1/8" 1 pair
GPMQ42801-1/4" x 5/32" 1 pair
GPMQ42812" x 5/32" 1 pair
GPMQ42822" x 3/16" 1 pair
Bolt-On Axle Shafts
Axle shaft lineart

For Flat Aluminum (Dural Style) Landing Gear

GPMQ42751-1/4" x 1/8" 1 pair
GPMQ42761-1/4" x 5/32" 1 pair
GPMQ42772" x 5/32" 1 pair
GPMQ42782" x 3/16" 1 pair
Nylon Strut Fitting
Strut fitting lineart

Works great on flying wires to stabilize wings.

Easy to install - threads onto 6-32 struts or threaded wire

GPMQ42586-32 Nylon Strut Fitting
Wing Tip Skids
Wing tip skids lineart

Protects wing tips from incidental contact with the ground.

Makes a great tail skid.

GPMQ4445Nylon 3 pcs.